Forced Outage Emergency Recovery Tip

Forced Outage Emergency Recovery Tip

GE Emergency Toroid Repair
Click to View Article

Forced Outage Emergency Recovery Tip
Desperate repair on GE crossovers that will make you look like a genius

Scotty! Get those warp drives back on line now!

Power plant maintenance personnel managed to fix a GE steam turbine crossover expansion joint blowout with a clever repair; earning a hats-off from the impressed.

Oakridge Bellows engineering team. Sirs, we salute you.
This usually means an extended unscheduled outage. We don’t see this every day We get a lot of GE (and Westinghouse) crossover rebuilds every Spring and Fall, and not much surprises us when we pull off the outer casing covers, until we noticed this obvious blowout. This rebuild order was placed months in advance so that the bellows cartridges
were ready for the standard 2 week turnaround once the low boy truck pulls up with the cross-over piping – no way the utility could have operated with this size hole.

Notice the band as seen from the outside – Mystery solved And then we saw the weld band on the inside. The GE toroid design is the gold standard of metal bellows, and its unique flat spot between convolutions makes it possible to seal off the individual toroid without having to make a weld anywhere near the ‘flexing zone’. Again, this repair is unique to the GE toroid bellows.

And yes, it locked up a needed convolution and forced the others to take more movement, but hey – desperate times call for desperate measures. Although the plant management sweated it out during the 8 months until their scheduled outage, they made it.

A welded band sealed off the leaking toroid convolution. Brilliant.

The Bottom Line – Don’t ignore the warning signs. The plant personnel did notice steam leaks under the casing covers for some time before the blowout but were not sure of the source. Folks, always put your money on the bellows as the leak source. It is rarely anything else.

A word of caution to plant managers – blowouts like this not only cause unscheduled outages, but can also injure people on the turbine deck.

After 25 years of service, GE recommends having the toroid cartridges changed out; that is the proactive approach to steam turbine equipment maintenance.

But when all else fails – remember this repair tip.

*Oakridge Bellows is not associated with GE or Westinghouse

Share:

About The Author

Greg Perkins
Greg Perkins
President & General Manager

Greg Perkins has 25 years experience in the expansion joint industry. In his previous employment with Senior Flexonics Pathway, Greg Perkins held the position of CEO and General Manager for 11 years. Prior positions include project engineer, director of engineering, and business unit manager.

In addition Greg, a degreed engineer, served on both the EJMA (expansion joint manufacturers association) technical and management committee tasked with developing/updating bellows and expansion joint performance criteria. Proficient in ASME design codes. Patents include high temperature piping restraint structures for expansion joint applications.

Got questions? Need answers? Call Greg today (830) 626-7773 or send him an email [email protected]!